《中国康复理论与实践》

《中国康复理论与实践》 ›› 2014, Vol. 20 ›› Issue (9): 892-894.

• 康复工程 • 上一篇    下一篇

基于ISO 7176-8 的手动轮椅车测试分析

谷慧茹，单新颖，闫和平
   

  1. 国家康复辅具研究中心，国家康复辅具质量监督检验中心，北京市100176
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2014-09-25 发布日期:2014-09-25

Quality Testing and Analysis of Manual Wheelchairs: Based on ISO 7176-8

GU Hui-ru, SHAN Xin-ying, YAN He-ping.
  

  1. National Research Center for Rehabilitation Technical Aids, National Quality Supervision & Test Center for Rehabilitation Technical Aids, Beijing 100176, China
  • Received:1900-01-01 Revised:1900-01-01 Published:2014-09-25 Online:2014-09-25

PDF (PC)

摘要： 目的检测我国生产轮椅车的质量参数。方法选取20 辆轮椅车按照国际标准ISO 7176-8，完成静态强度、冲击强度和疲劳强度测试。结果最终8辆轮椅车通过质量检测。结论轮椅车质量关键点是疲劳强度数据。

关键词: 手动轮椅车, 静态强度, 冲击强度, 疲劳强度, ISO 7176-8

Abstract: Objective To measure the quality of manual wheelchairs made in China. Methods 20 wheelchairs was tested with ISO 7176-8, focused on the static strength, impact strength and fatigue strength. Results 8 (40%) wheelchairs passed the test. Conclusion The fatigue strength is the key factor of the wheelchair quality.

Key words: manual wheelchairs, static strength, impact strength, fatigue strength, ISO 7176-8